If your mount is not listed below, or if you do not know what brand and model outrigger mounts or holders you have, just shoot us an email or call. We can often determine what mounts are after just a few questions or a picture or two!
1 1/8″
- Taco GS-170, Taco Shadefin Mount
- Tigress 88960 Tiger Fish
1 3/8″
- Lee’s AL7211CR 45deg center rigger mount
- Lee’s AL7001CR 22deg center rigger mount
- Lee’s AL7300-series clamp-on center rigger mount
- Sch. 40 1-1/4″ pipe I.D. (common welded on 6061 Aluminum tube size)
1 15/32″
- 1 15/32″ Taco Grand Slam 200 and 300 series (with mushroom head spring-loaded retention pin mechanism)
1 1/2″
- Rupp Top Gun (Classic, Z-30, Revolution, Weld-in adjustable-height and fixed-elbow styles)
- some E-Tec (e.g.: slide out/up to lay flat style)
- Tigress 88800-series Tiger Shark
- Lee’s MX7211CR 45deg center rigger mount
- Lee’s MX7001CR 22deg tripod center rigger mount
- Lee’s MX7002CR 30deg tripod center rigger mount
- Lee’s MX7003CR 45deg tripod center rigger mount
- Gemlux Deluxe
1 9/16″
- most (2000-2010 year) E-Tec
- Gemlux Bluewater
1 5/8″
- Lee’s Sidewinder 9000 series
- Lee’s MX7000-series lift-outs (outside diameter of your pipe will be under 2″)
- Marsh Tacky Carbon M15
1 3/4″
- Rupp Tournament lift-out
- Lee’s MX8000-series lift-outs (outside diameter of your pipe will be approximately 2″)
1 7/8″
- Lee’s Jr. and lift-out mounts with 2″ O.D. stainless main tubes
- LD’s heavy duty lift-out (please note on order comments that you need 1.820″ for LD’s as 1-7/8″ will be slightly too large)
Twist & Lock
- Taco Grand Slam 450 and 500 with Pat. Pending Twist & Lock receiver